WDS 76 is a modern and technologically advanced family of profile systems for windows and doors.<\/p>\n
Advantages for consumers: the opportunity to get a modern product with an optimal ratio of of cost and performance characteristics.<\/p>\n
WDS 76 is a series of profiles for the production of windows and doors, as well as sliding structures.
\nAdvantages in detail:
\n– The heat transfer coefficient Uf of the WDS 76 MD frame and sash section is 1.2 W\/(m\u00b2K). The same Uf
\nvalue is the same for the WDS 8S sash frame (installation width 82 mm).
\n– The heat transfer coefficient Uf of the WDS 76 AD sash frame section is 1.3 W\/(m\u00b2K).
\n– It is possible to install double-glazed units with a width of 48 mm, which have Ug [4i-18ar-4-18ar-4i] = 0.5 W\/(m\u00b2K).
\nInsulating glass units with smaller widths (40 and 44 mm) have a lower Ug = 0.6 W\/(m\u00b2K), and insulating glass units with larger widths (52 and 56 mm) have the same Ug = 0.5 W\/(m\u00b2K).
\nThat is, installing a 48 mm double-glazed unit is the optimal solution in terms of cost and performance. Since a double-glazed unit occupies up to 80% of the construction area, the use of a 48 mm double-glazed unit significantly improves the thermal insulation of the final product.<\/p>\n
In addition, wider glass can be used in 48 mm double-glazed windows, which improves sound insulation and safety characteristics.
\n– The configuration of the reinforcement chamber allows the use of reinforcement with a high moment of inertia even with a thickness of 1.2 mm.
\n– The range of reinforcement for window and door profiles WDS 76 MD and WDS 76 AD, as well as two and two extensions includes only 5 items.
\n– The design of the profile allows you to make both sashes tilt-and-turn without the use of special hardware.
\n– The third sealing contour is rolled into the profile and can be easily welded and processed.
\n– There is no need to remove or cut the frame and third circuit seal when installing the impost.
\n– The sophisticated threshold sealing system allows to significantly increase the usually cold Uf value of the of the threshold sash to 1.7 W\/(m\u00b2K).
\n– The threshold design allows the installation of hooks for reliable clamping and sealing of the lower and upper parts of the sashes.
\n– The threshold design provides for the installation of 70 mm wide extensions, which makes it easy to to design an assembly unit.
\n– Additional profiles have seals to seal the joints.
\n– The door leaves use closed reinforcement with longitudinal welding for for better mechanical strength.
\n– The leaf for doors with low opening frequency is also an impost for structures with with increased static loads.<\/p>\n
– Universal threshold connector for window and door frames.
\n– The use of the new warm static connector allows structures with a height of 2.8 m (with a load width of 1.4 m) to withstand wind loads in residential buildings up to
\n73,5 \u043c. This is enough for the vast majority of houses being designed in Ukraine.<\/p>","protected":false},"excerpt":{"rendered":"